CSZX14 CYLINDER STUD INSTALLATION INSTRUCTIONS
1. Long threaded end must be installed in the case.
2. Note stock stud location before removing. There may be several different stud lengths.
3. After removal of stock studs (removal tool #SP-100 available from APE) thoroughly clean holes with solvent and blow out.
4. Use two 7/16 nuts on the short end thread. Dip long thread in oil and install in the case. Torque to 12-15 ft. lbs. / 16-20nm maximum.
5. Using APE head nuts, torque to 55 lbs / 75nm